Currently, Apple likes to talk about water resistance or installation, but it was never this way: before the launch of the iPhone 7 (and Apple Watch Series 2), the company didn't publish IP ratings, even though its competitors were happily announcing the power of their machines of dealing with splashes, aerosols and even completely immersing in the liquid.
This makes it very difficult to talk about water resistance with the Apple Watch, because the company has been producing and selling smartwatches from before they could see the light of IP measurements.
Apple's latest watches have been officially certified as high-performance water, but the issue is a bit more complicated for older models.
In this article we discuss the water resistance of each Apple Watch model, (and the straps, which are easy to forget and may be much less water resistant than a large chassis).
We also explain what to do when your outfit gets wet, and how to deal with water-damaged Apple Watch.
What are Apple's water-resistant watches?
All of Apple's watches are water resistant to a greater or lesser degree, but Apple is careful to avoid such restrictions as waterproofing, which means not being overcome. There is always a limit.
The five generations of the Apple Watch can be divided into two groups, based on their alcohol resistance and Apple's recommendations and warnings.
- Apple's first watch with Series 1: Water and Splash resistance, but it is not recommended to tap it.
- Apple Watch Series 2, 3 and 4: The water is up to 50m, but Apple recommends swimming with it in shallow water and protecting "high water."
We will go into more detail in this article with each model that appears below.
If you wish, you can check out all of the Apple Watch models available at Apple Store by clicking on this link. And if you like, you can also explore something different Apple Watch Offer on Amazon Spain.
Is the original Apple Watch waterproof?
The first Apple Watch of 2015 has an IPX7 water resistance rating according to IEC 60529.
We go into IP measurements with great depth below, but in short this means that it is protected from submersion in water, reaching a depth of 1 m for a maximum of 30 minutes.
Apple warns that, although the first-generation Apple Watch is Splash and is water resistant (Tim Cook reportedly uses his watch), it is not recommended to install it completely.
If your original Apple Watch gets wet, we recommend moving on to the section: What to do when your Apple Watch gets wet.
Is the Apple Watch Series 1 a water clock?
The Apple Watch 1 watch series has an IPX7 water resistance rating according to IEC 60529, similar to the first generation of Apple Watch watches.
Also, this means that it is protected from dehydration, up to a depth of 1 m for a minimum of 30 minutes.
Although the Apple Watch Series 1 is ineffective and waterproof, Apple does not recommend installing it completely. If your Apple Watch Series 1 is completely submerged, go ahead until you read the section where it explains what to do when your Apple Watch becomes wet.
Is the Apple Watch Series 2 a water clock?
The Apple Watch Series 2 has a water resistance of up to 50 meters according to ISO 22810: 2010. In other words, you can swim safely as long as you go deep.
This means that there are limits, and Apple is always cautious and clearly explains what can be done with the Apple Watch underwater and what doesn't. According to Apple, with the Apple Watch Series 2 you can:
- Swimming pool
- Swimming in the sea
However, Apple is also clarifying that you never know perform the following operations, either submerge or spray with the following liquor:
- Death
- Water skiing (or other activities that involve water at high speeds)
- Saunas and Turkish baths
- Use soap, shampoo or conditioner
- Sprinkle with perfumes, lotions or oils
- Acids
- Revenge of insects
- The sun
- Hair dye
Apple also warns that the fall could damage the Apple Watch Series 2's waterproof wires and wires, and that this could be damaged over time, so don't think your Apple Watch is water resistant after having it as a year as it was the day you bought it.
(And there's no way to check if the water resistance is still OK, says Apple, or reinstall it if not).
Is the Apple Watch Series 3 a water clock?
The Apple Watch Series 3 has the same distinction as the Series 2: water resistance at 50 feet below ISO 22810: 2010.
Therefore, when swimming in shallow water is also advisable, but it is advisable to avoid diving, water skiing or any other activity involving "water speed or submersion".
Is the Apple Watch Series 4 waterproof?
Series 4 has the same classification as Series 2 and 3: water resistance to 50 meters below ISO 22810: 2010, with a formal warning to avoid drag, water skiing or water acceleration.
Is the Apple Watch Series 5 a water clock?
Yes .. The Apple Watch was designed for use by swimmers. Water and water resistance is 50 meters.
Is the cord on my Apple Watch also waterproof?
This is an important consideration. The water resistance measurements discussed above apply to the body of the clock itself, but the cord may not be immune to liquid damage.
Apple specifically warns that Classic Buckle, Leather Loop, Modern Buckle, Milanese and Link bracelets are not water. The best water resistance band is the Sport Band.
What does IP rating mean?
An IP measure, which measures the protection or strength of an anti-physical substance, contains two numbers. (IP is initially an indicator that it is in the middle of an IP rating readout).
The first number, usually up to 6, shows how good the machine is with the rigging resistance. A lower number means bigger things can get on the phone and cause problems; a higher number means that it is protected from the smallest objects such as dust. A rating of 6 means the product is dust.
The second digit, which covers fluid insertion, is most appropriate in this case. These numbers are usually up to 8, although the 9 or 9K split is less noticeable when the tool is able to withstand water under pressure or steam.
This is what the digits mean in terms of water / fluid resistance:
- 0: Not protected from alcohol
- 1: Protected from direct water loss
- 2: Protected from gravity when you grow to 15 °.
- 3: Protected from spilled water (at any place up to 60 °)
- 4: It is protected from splitting water against houses in any way
- 5: Protected from nozzle-shaped water (6.3 mm) against the house in any direction.
- 6: Protected from reflective water from powerful jets (12.5 mm nozzle) against houses in any direction.
- 6K: Protected from strong water barrels with increasing pressure
- 7: Protected from immersion in water, up to 1 m depth for 30 minutes
- 8: Protected from exposure to liquid, 1m or more deep (exact details vary)
- 9/9K: Protected from the hot water / jet stream
X classification in any of the two categories means "unsuitable" or "unsuitable." It does not mean that you have no security for that component: it means that this section of IP does not comment on that feature in any way.
So the IPX7 rating of the Apple Watch and Series 1 means: Protected from submersion in liquids, up to 1 meter in depth for more than 30 minutes, without any dust resistance or any other available.
What to do when your Apple Watch gets wet
The wet iPhone is almost always an emergency (see: How to fix a wet iPhone), but if your Apple Watch is wet, it's more likely to get it right. Of course, this depends on the model you have and the depth or pressure of the water.
Apple Watch Series 2 or later
If you have an Apple Watch Series 2 or later, the key is to use Water Lock.
Water Lock is a screen lock that prevents it from running in the pool or shower, which works great.
Then, when you return to the main world, open the screen by rotating the digital crown dial, and then the clock automatically pulls out the repeating bead to vibrate the speaker lever and drains any remaining water of the speaker.
Apple explicitly states that you should not install anything on the microphone or speaker ports, or give the watch a try to clear the remaining water. Simply use the Water Lock Beep, and make the dry air look.
The water lock is activated by swiping from the Apple Watch screen to open the & # 39; control Center & # 39; then tap the drainage icon.
According to the & # 39; Control Center & # 39; screen layout In your case, you may need to swipe to find this icon.
(The water block automatically activates when you start a swimming session in the program & # 39; Training & # 39;
However, if you forgot to use the & # 39; water key & # 39; before going into the water, that will be the case if the clock falls shallow in the pool, toilet, etc., you can use it to drain the water from the start of the speaker.
Pause excess water, then open the & # 39; Control Center & # 39; then touch the drag icon, then open the rotary knob to turn off the key and release the water.
The latest Apple Watch may be designed for swimming, but Apple advises you to clean it after coming out of the pool or sea: after all, there may be chlorine in the pool and sea salt.
Thoroughly clean the Apple Watch with warm tap water and dry it carefully.
Apple also warns that the watch should be cleaned with fresh water and dried with a non-line cloth if it comes in contact with something other than fresh water.
These steps should also be used – at a high speed of emergency – if your watch is wet with some non-water solvent (be it sun, orange juice, or sulfuric acid).
In extreme cases it may be worth doing this experiment yourself – rinse with warm tap water, clean excess, use a Water Lock vibrator to drain the inner water, dry it with a soft cloth, let you do more charging at night – and go to the Apple store to check if everything is going well. .
Series 1 and original Apple Watch
Apple's classic fashion watches are not designed to be fully immersed. Most first-time users have tried it anyway and have never heard of anyone who regrets it, but as we play it safe, we will remove water from the device as quickly and efficiently as possible.
Apple suggests that you test the internal water at different ports (which can be dangerous) by placing a watch, speaker down, and a soft cloth to see if something is striking.
You do not have the option to expel water from these ports, such as Series 2 and the waterproofing function, so the best option is to let the water out; The night may have accelerated the process.
Like the latest models, don't be tempted to gossip with speakers and microphone trying to drain the water: this may have caused some problems. Don't shake the clock again.
Either your Apple Watch has received only a few splashes, or even if you swear a lot by wearing it, it is advisable, with great safety and product care, to give it a clean up.
Wipe excess water with a non-excessive, non-sticky cloth. (Do not use heat or compressed air.) Remember also to dry the belt.
Table of Contents
